Step 1:
Installation should take less than 5 minutes and can be easily performed by one person. You will need your curtain, two nails or cup-hooks, a pencil, and a hammer. You can choose to hang your curtains with either finishing nails or cup hooks. You may wish to level and center your beaded curtain with a tape measure or level. However it is often best to center and level your beaded curtain by eye, as walls and doors may not be plumb. Depending on how you wish to hang your beaded curtain you may also need a cutting tool.

Step 2:
Hold your curtain up to where you wish to mount it. You have the option of mounting the curtain inside or outside of the door frame (as shown to the right). Level and center your beaded curtain either with a tape measure and level or by eye and then make your pencil marks. Some doorways are not the standard width. To hang inside these door frames you may need to trim your beaded curtain to fit. When trimming the beaded curtain take care to make good measurements prior to cutting.

Step 3:
Nail in your finishing nails or screw in your cup hooks. Make sure these are securely placed into the wall or door frame.

Step 4:
Almost done! Hang your beaded curtain. When using cup hooks inside the frame as shown some customers prefer to bend the hooks into closed loops over the hanging loops on the beaded curtain. This will reduce the possibility of the beaded curtain becoming dislodged in this configuration.

Step 5:
Congratulate yourself on your accomplishment, and enjoy your curtains!